gen4-4DPi-50CT-CLB

Abbildung kann vom Original abweichen

Description: 5.0 480x800 touch RaspberryPi Hersteller: 4D SYSTEMS Matchcode: gen4-4DPi-50CT-CLB Rutronik No.: DISMON1355 VPE: 1 MOQ: 1 Package: N/A Verpackung: INDIVIDUAL

Alternativen finden

Datenblatt Einfügen in Projektliste Muster

Download the free Library Loader to convert this file for your ECAD Tool

Parameter

Panel size: 5 Inch
Resolution: 480x800 Pixel
Aspect ratio: 3:5
Backlight: LED
Brightness: 475 cd/m²
Viewing angles: 70/60/140 °
Technology: TFT LCD
Contrast: 500:1
Reaction time: N/A ms
Video input: N/A
Interactive: Cap Touch
Oper.temp.: -20 - +70 °C
Fanless: YES
24/7 certified: N/A
Length: 140.7 mm
Height: 7.8 mm
Width: 93.8 mm
Weight: N/A KG
Open frame: NO
Powerconsumpt.: 4V - 5,5V watt
Automotive: NO
Gehäuse: N/A
RoHS Status: RoHS-conform
Verpackung: INDIVIDUAL

ECCN: 5A992
Zolltarifnummer: 85371091200
Land: Australia
ABC-Schlüssel: A
Lieferzeit beim Hersteller: 10 Wochen

Beschreibung

5.0" Gen4 Primary Display for the Raspberry Pi & ASUS Tinker Board - Capacitive Touch

The gen4-4DPi range are Primary Display’s for the Raspberry Pi A+, B+, Pi2, Pi3, Pi3 B+, Pi Zero and Pi Zero W & ASUS Tinker Board, which display the primary output of the Raspberry Pi & ASUS Tinker Board, like what is normally sent to the HDMI or Composite output. It features an integrated Resistive Touch panel or Capacitive Touch panel, enabling the gen4-4DPi to function with the Raspberry Pi & ASUS Tinker Board without the need for a mouse.

Communication between the gen4-4DPi and the Raspberry Pi & ASUS Tinker Board is interfaced with a high speed 48Mhz SPI connection, which utilises an on-board processor for direct command interpretation and SPI communication compression, and features a customised DMA enabled kernel. This combination allows this display to output high frame rate compared to other SPI display solutions, when displaying a typical image/video, and can achieve higher depending if the image can be compressed.

The gen4-4DPi is designed to work with the Raspbian Operating System running on the Raspberry Pi & ASUS Tinker Board, as that is the official Raspberry Pi & ASUS Tinker Board operating system. It is also compatible with Pixel and Scratch.

The gen4-4DPi range connects to the Raspberry Pi & ASUS Tinker Board’s 40 pin header using the gen4-4DPi Adaptor, which then connects to the gen4-4DPi display module using a 30-way FFC Cable.

Mounting of the gen4-4DPi is achieved with the 4x4mm mounting holes present on the Resistive Touch Display Modules, enabling standard screws to fasten the Gen4-4DPi as required, or via the adhesive supplied on the Cover Lens Bezel which is part of the Capacitive Touch Version.