TLE72593GEXUMA3

The TLE7259-3GE is a transceiver for the Local Interconnect Network (LIN) with integrated Wake-Up and protection features. It is designed for in-vehicle networks using data transmission rates from 2.4 kBaud to 20 kBaud. The TLE7259-3GE functions as a bus driver between the protocol controller and the physical bus inside the LIN network. Compliant to all LIN standards and with a wide operational supply range the TLE7259-3GE can be used in all automotive applications. Different operation modes and the INH output allow the TLE7259-3GE to control external components, like voltage regulators. In Sleep-mode the TLE7259-3GE draws typically less than 8 μA of quiescent current while still being able to wake up off of LIN bus traffic and a local Wake-Up input. The very low leakage current on the BUS pin makes the TLE7259-3GE especially suitable for partially supplied networks and supports the low quiescent current requirements of the LIN network. Based on the Infineon Smart Power Technology SPT®, the TLE7259-3GE provides excellent ESD Robustness together with a very high electromagnetic immunity (EMI). The TLE7259-3GE reaches a very low level of electromagnetic emission (EME) within a broad frequency range and independent from the battery voltage. The Infineon Smart Power Technology SPT® allows bipolar and CMOS control circuitry in accordance with DMOS power devices existing on the same monolithic circuit. The TLE7259-3GE and the Infineon SPT® technology are AEC qualified and tailored to withstand the harsh condition of the Automotive Environment.

Summary of Features

• Single-wire transceiver, pin compatible to the predecessor TLE7259-2GE
• Transmission rate up to 20 kBaud
• Compliant to LIN specification 1.3, 2.0, 2.1 and 2.2
• Very high ESD robustness, +/- 15 kV according to IEC61000-4-2
• Optimized for low electromagnetic emission (EME)
• Optimized for high immunity against electromagnetic interference (EMI)
• Very low current consumption of typically <8µA in sleep mode
• Wake-Up source detection
• Very low leakage current on the BUS output
• Digital I/O levels compatible for 3.3 V and 5 V microcontrollers
• Suitable for 12 V and 24 V board net
• Bus short to VBAT protection and Bus short to GND handling
• Over temperature protection and Under voltage detection
• Flash mode
• Green Product (RoHS compliant)
• AEC Qualified

Target Applications

• Body Controllers and Gateway Modules
• Switch Panels
• Wiper and Window Lift Modules
• Door and Seat Control Modules
• Engine Management Units